Bando CVT Belt 788-17-30 (40QMB, JOG)
Description: Bando Brand Premium CVT Drive Belt size 788-17-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. CVT Drive Belt size 788-17-30 commonly found on Yamaha Jog CY50 '92-'01 with Minarelli engine. Also found on European and South American models of the Yamaha Jog 50.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces OEM Belts: 3KJ-17641-00, 3KJ-17641-00-00
• Nylon Reinforced Material
• Length: 788mm (Loop 15.511 in.)
• Top Width: 17mm (0.669 in.)
• Groove Angle: 30º
• Made in Japan
• Fit JOG 50
• Fit QMB 40
Supported Models: 40QMB 50cc 2-stroke, Yamaha Jog CY50 '92-'01 with Minarelli engine, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.25 pounds | 15.511” (L) x 0.669” (W) x 0.354” (H)
From Same Category
- Stock: 37
- Reward Points: 1
- Part #: 106-114