Bando CVT Belt 871-22.2-30 (Roketa, Tank, SUNL)
Description: Bando Brand Premium CVT Drive Belt size 871-22.2-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. CVT Drive Belt size 871-22.2-30 commonly found on Tank, Roketa, and SUNL Scooters with 257cc and 300cc Yamaha Linhai engines.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Nylon Reinforced Material
• Length: 871mm (Loop 17.145 in.)
• Top Width: 22.2mm (0.874 in.)
• Groove Angle: 30º
• Heat and Oil Resistant
• Made in Japan
• Fit Roketa
• Fit Tank
• Fit SUNL
Supported Models: Tank, Roketa, and SUNL Scooters with 257cc and 300cc Yamaha Linhai engines
Item Weight & Product Dimensions:
• 0.29 pounds | 17.145” (L) x 0.874” (W) x 0.354” (H)
- Stock: 40
- Reward Points: 1
- Part #: 106-105