Bando CVT Belt 977-23.3-30 Kevlar (Kymco 250)
Description: Bando Brand Premium Kevlar CVT Drive Belt size 977-23.3-30 is made in Japan, not China's version. Its material used is Aramid aka “Kevlar” which is used in making bullet-proof vests. Aramid characteristics reduce belt stretching and stress that can adversely affect the quality of belt engraving performance while preserving long belt life. Recommend for heavier duty off-road application. CVT Drive Belt size 977-23.3-30 commonly found on Kymco People 250, People S 250i, People S 300i, and XCITING 250. Replaces Kymco belt numbers 23100/LLJ3/E00 and 23100/LLJ/9000.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces Kymco OEM Belts: 23100/LLJ3/E00, 23100/LLJ/9000
• Aramid Bullet Proof Vest Reinforced Material
• Length: 977mm (Loop 19.232 in.)
• Width: 23.3mm (0.917 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• Made in Japan
• Fit Kymco 250/300+
Supported Models: Kymco People 250, People S 250i, People S 300i, and XCITING 250, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.42 pounds | 19.232” (L) x 0.917” (W) x 0.354” (H)