Bando CVT Belt 977-24.8-30 (Xciting 500)
Description: Bando Brand Premium Kevlar CVT Drive Belt size 977-24.8-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. CVT Drive Belt size 977-24.8-30 commonly found on Kymco Xciting 500 ('07-'09) street scooters. Replaces OEM Belt # 23100-LBA-2-E00.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces OEM Belt: 23100-LBA-2-E00
• Nylon Reinforced Material
• Length: 977mm (Loop 19.232 in.)
• Top Width: 24.8mm (0.976 in.)
• Groove Angle: 30º
• Made in Japan
• Fit Xciting 500
Supported Models: Kymco Xciting 500 (2007-2009), Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.425 pounds | 19.232” (L) x 0.976” (W) x 0.354” (H)
From Same Category
- Stock: 40
- Reward Points: 5
- Part #: 106-127