Continental Contitech XT 835-20-30 CVT Drive Belt (GY6 longcase)
GY6 longcase length: 17-7/8 inches
Description: Continental Contitech Scooter XT Premium CVT Drive Belt size 835-20-30 are made in Korea, an engineer in Germany. Continental went back to the drawing board for the Conti Scooter XT and came up with a new compound and design that works wonders in many variator drive applications. The compound and tension member quality are every bit as high as for OEM. In addition to the improvements made in the material, the newly developed belt toothing, which is optimally mated to the drive geometry, ensures enhanced efficiency. Power is reliably transmitted, even at a high gear rate. Standard fit for GY6 150cc 4-stroke ATVs and Street Scooters with 12 or 13-inch rear wheel longcase engine.
NOTE: If the distance from the center of the variator nut to the center of the clutch nut is 11", then you would use an 835 belt (most if not all Chinese long case 150cc engines). Another way to determine if you have a GY6 shortcase or longcase engine? If it has 10 bolts securing CVT cover and measures horizontal 17.875" across the CVT cover it a longcase which uses an 835-CVT belt. If it has 8 bolts securing CVT cover and measures horizontal 16.142" across the CVT cover its a shortcase which uses a 743-CVT belt.
Include the following one belt.
• Premium Grade Reinforcement Cords
• Length: 835mm (Loop 15.837 in.)
• Width: 20mm (0.787 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• Made in Korea
• Fit 12" or 13" Rear Wheel Longcase Engine
• Fit 54mm Stud Spacing (A-Block) - longcase
• Fit 57mm Stud Spacing (B-Block)- longcase
• Fit GY6 125/150cc+
Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento
Item Weight & Product Dimensions:
• 0.3 pounds | 16.437” (L) x 0.787” (W) x 0.354” (H)