Dr. Pulley Variator Roller Weight Set 20x15 (GY6B, PCX)
Description: Dr. Pulley 20x15mm Round Roller Weights for GY6B 150cc 4-stroke ZNEN and Honda PCX 125/150cc 4-stroke engines. Dr. Pulley Roller Weights are the latest roller weights to hit the market and the most advanced weights available. These Variator rollers perform up to 20% better than standard round weights and last up to 18% longer with 22% less performance material loss. The weights have several unique features such as their composite material being nylon for faster performance.
Dr. Pulley Variator Roller Weights means better performance from your scooter no matter what stage you are in upgrading your scooter. Simply add 9-grams or 11-gram weights and a CVT Kit, and a new belt for a powerful upgrade. The larger weight size will add the top end only when you are doing other upgrades to make up for the loss of bottom or take-off. The same is true for lighter weights, if you go too light you will need to make up for the loss on the top end. 125/150cc scooters we have found do best with 9-gram or 11-gram weights, use 9-gram for over 200lbs. 11-gram under 200lbs. Add the Dr. Pulley variator to complete your upgrade.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
NOTE: Please select weight from the menu.
• Broadens your range of gear ratios
• Fastest Roller Weights available
• High-Temperature Resistance
• Increases acceleration and re-acceleration properties
• Increases top-end speed
• Lasts longer than standard roller weights
• Low Friction Coefficient (low wear)
• No abrasive fibers (glass fiber or carbon fiber)
• Suitable for aluminum variator housing
• 6x Roller Weights: 20x15mm 8gm<21gm
• U.S. Patent Number: 7,276,004
• Material: SL-9T, SL-9TS (oil-less PA46)
• Made in Taiwan
• Fit Dowel Pin Set (8x14mm)
• Fit Belt Size: 836-22-30 (Honda PCX ONLY)
• Fit GY6B 150cc+
• Fit PCX 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1195); Aprilia Scarabeo 4T, Genuine Blur 220i, GY6B 150cc 4-stroke, Honda PCX, Honda SH 125, Honda SH 150, ZNEN ZN150T-18
Item Weight & Package Dimensions:
• 0.126~0.179 pounds | 5.317" (L) x 3.127" (W) x 1.145" (H)