Main Menu
Your Cart

Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)

Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)
Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)
Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)
Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)

Description: Dr. Pulley 24x15mm Sliding Weights for Elite, Helix 250. Traditionally, the gear ratio is changed by the up-and-down rolling movement of the rolling weights in the ramp of the Moveable Drive Pulley (MDF). Now the innovative Dr. Pulley Sliding Weights slide up and down the ramp to change the gear ratio. This unique sliding movement (not rolling) provides exclusive advantages to increase CVT performance. With Dr. Pulley, no abnormal wear will occur even when running in high gear. Dr. Pulley's U.S. Patent Number 7,276,004 states that their sliding weights eliminate abnormal wear, prevent reduction gear ratio deterioration, prolong the useful life of the transmission, and have the availability to adjust reduction gear ratios as well as driving performance. At the same time, Dr. Pulley Sliding Weights are also adapted to compensate for wear automatically, to adjust by itself to move further outward in a movable drive pulley half, and to make the vehicle reach a higher maximum vehicle speed.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

NOTE: Please select weight from the menu

Features:

•    Broadens your range of gear ratios
•    Fastest Sliding Weights available
•    High-Temperature Resistance
•    Increases acceleration and re-acceleration properties
•    Increases top-end speed
•    Lasts longer than standard roller weights
•    Low Friction Coefficient (low wear)
•    No abrasive fibers (glass fiber or carbon fiber)
•    Suitable for aluminum variator housing

Specifications:

•    8x Sliding Weights: 24x18mm 13gm<33gm
•    U.S. Patent Number: 7,276,004
•    Material: SL-9T, SL-9TS (oil-less PA46)
•    Made in Taiwan
•    Fit CN250
•    Fit Burgman 250

Supported Models: Honda CN250, CN 4T 250, Helix 250, Elite 250, Suzuki Burgman 250, and various unlisted makes/models

-----
Item Weight & Package Dimensions:
•   0.028~0.072 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Dr. Pulley Variator Sliding Weight Set 24x18 (Elite, Helix 250)
  • Stock: 31
  • Reward Points: 1
  • Part #: 169-328
Sold: 13
Views: 2245
$35.95
Price in reward points: 36

Included