Ban Jing Variator 115mm Kit (GY6)
Description: Ban Jing 115mm performance variator with lightweight forged drive face for GY6 125\150cc 4-stroke engine based scooters, ATVs, and off-road karts. This variator uses six 20x12 weights to allow for additional movement versus a standard 18x14 weight. Variator kits include a pack of 12g weights. Please see related items for additional 20x12 weights. Normally, 20x12 weights are sold in packs of eight, so you will have leftovers.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Includes the following Variator housing, Variator slides, Roller Weights, Variator top, and Drive Face Fan.
• 1x Alumin-Alloy Housing ID: 24mm / OD: 115mm / H: 36mm
• 6x Roller Weights: 20x12mm 12gm
• 1x Metal Top ID: 15mm / OD: 87mm / H: 24mm
• 3x Plastic Slides
• 1x Forged Drive Face Fan Weight: 154gm / OD: 115mm
• Splines: 19 / ID: 14.1<15mm
• Made in Taiwan
• Fit Dowel Pin Set (8x14mm)
• Fit Belt Size: 842-20-30
• Fit Boss ID: 15mm / OD: 24mm
• Fit Roller Weights: 20x12mm
• Fit 54mm Stud Spacing (A-Block)
• Fit 57mm Stud Spacing (B-Block)
• Fit GY6 125/150cc+
Supported Models: Ban Jing CVT KIT (Part# 169-500); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento
Item Weight & Package Dimensions:
• 1.28 pounds | 8" (L) x 5.48" (W) x 4" (H)