Gates CVT Belt 842-20-30 PL20708 (GY6 XLongcase)
Description: Gates Powerlink Standard CVT Drive Belt size 842x20x30 are made in China by the U.S.A. Company Standard. Specifically designed for a variety of motorized CVT applications including street-legal scooters and go-karts. Standard fit for GY6 150cc 4-stroke ATVs and Street Scooters with 12 or 13-inch rear wheel extra longcase engine.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
NOTE: If the distance from the center of the variator nut to the center of the clutch nut is 11.25", then you would use an 842 belt (Taiwanese scooters like TGB Laser 150cc).
Include the following one belt.
• Poly Reinforcement Cords / CR Construction
• Length: 842mm (Loop 15.975 in.)
• Width: 20mm (0.787 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 30° (0.3 in.)
• Heat and Oil Resistant
• U.S.A. Company / manufactured in CHINA
• Fit 12" or 13" Rear Wheel XLongcase Engine
• Fit 54mm Stud Spacing (A-Block) - XLongcase
• Fit 57mm Stud Spacing (B-Block) - XLongcase
• Fit GY6 125/150cc+
Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento Phantom R3 '03\R4i '04-'06
Item Weight & Product Dimensions:
• 0.35 pounds | 16.575” (L) x 0.787” (W) x 0.354” (H)