NCY Variator 94.8mm (Zuma 50)
Description: The ultimate variator for your Zuma CW50 and Zuma 50F transmission! This beauty is lighter than any other variator on the market weight in at 6 oz and at 94.8mm outer diameter drive face is ideal for all types of riding.
NOTE: Recommend using a new belt with this kit. Belt and the belt drive facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following Variator housing.
• 1x Alumin-Alloy Housing ID: 17.52mm / OD: 94.81mm / H: 26.67mm
• Made in Taiwan
• Fit Metal Top ID: 14.15mm / OD: 73.50mm / H: 11.58mm
• Fit 6x Red Roller Weights: 15x12mm
• Fit Belt Size: 758x17.5x28
• Fit Zuma 50cc+
Supported Models: Zuma CW50, Zuma 50F, Vino and C3
Item Weight & Product Dimensions:
• 0.375 pounds | 3.732" (OD) x 0.69" (ID) x 1.05" (H)