Main Menu
Your Cart

G- Clutch Kit (Aprilia, Linhai)

G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)
G- Clutch Kit (Aprilia, Linhai)

Description: Clutch Kit for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.


Includes the following Secondary sliding sheave assembly, Comp spring, Clutch, Clutch springs, and Clutch bell.

1.    Includes Secondary Sliding Sheave Assembly, slider (torque driver), O-rings, and clutch nut. 
•    1x Alumin Rear Pulley Plate OD: 164mm / Metal Shaft ID: mm / OD: mm / H: mm
•    1x Alumin Secondary Slider Plate OD: mm / Metal Funnel ID: mm / OD: mm / H: mm
•    1x Metal Secondary Spring Seat/Funnel ID: mm / OD: mm / H: mm
•    3x Stainless Steel Secondary Slider Guides ID: mm / OD: mm / L: mm
•    3x Stainless Steel Secondary Slider Pins OD: mm / H: mm
•    2x Rubber O-rings (pre-installed)
•    1x Bearing 6903RS ID: 17mm
•    1x Stainless Steel Clutch Nut OD: mm / ID: M / H: mm
2.    Includes Compression Spring, Compression spring.
•    1x Spring Comp: RPM / L: mm
•    Spring ID: mm / OD: mm
•    Wire Gauge: mm
3.    Includes Clutch, Clutch housing, Clutch springs, and Clutch weights.
•    1x Clutch ID: mm / OD: mm / H: mm
•    3x Clutch Weights (shoes)
•    3x Clutch Springs
4.    Includes Clutch Bell, Clutch Bell.
•    1x Iron Clutch Bell Weight: gm / ID: 145mm / OD: 155mm / H: 96mm
•    Splines: 16 / ID: 15.2<17.2mm / OD: mm / H: mm
    Fit Aprilia 250cc+
•    Fit Linhai 250cc+
•    Fit VOG 260cc+

Supported Models: Aprilia Leonardo 250, Aprilia Leonardo 300, Benelli Velvet 250, CF Moto V3/V5, Diamo Turista, Italjet Jupiter 250, JCL, VOG 260, Linhai Aeolus, Linhai ATV 260, Linhai Tank 260, Tank Touring 250DE, Malaguti Madison 250, Malaguti Password 250, MBK Kilibre 300, MBK Skyliner 250, Renault Kouranos 250, Roketa MC-54 250B, Xingyue VOG 260, Yamaha Majesty 250 (mod. 1999), Yamaha Majesty 250 and various unlisted makes/models

Item Weight & Package Dimensions:
•    8.806 pounds | 5.7" (OD) x 0.531<5.27" (ID) x 3.779" (H)

Write a review

Note: HTML is not translated!
Bad Good
G- Clutch Kit (Aprilia, Linhai)
  • Stock: 40
  • Reward Points: 4
  • Part #: 122-2
Sold: 0
Views: 1097
Price in reward points: 110