Main Menu
Your Cart

G- Variator Slide Set (GY6)

G- Variator Slide Set (GY6)
G- Variator Slide Set (GY6)
G- Variator Slide Set (GY6)
G- Variator Slide Set (GY6)

Description: Variator Slide Set for 150cc and 125cc GY6 4-stroke engines. The slide pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Variator slide set.

•    3x Plastic Slides
•    Color: Black
•    Fit Variator Housing: 114mm or 115mm / Weights: 18x14mm Top: 87mm Boss: 24mm / Shims: 24mm / Drive Splines: 19
    Fit Variator/Clutch Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit Belt Size: 743835842-20-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+

Supported Models: SSP-G CVT KIT (Part# 169-530); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento

-----
Item Weight & Package Dimensions:
•    0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
G- Variator Slide Set (GY6)
  • Stock: 40
  • Part #: 164-256
Sold: 0
Views: 2429
$3.99
Price in reward points: 4

Included