Main Menu
Your Cart

G- Clutch Drive Shaft 174mm (GY6)

G- Clutch Drive Shaft 174mm (GY6)

Description: Clutch Drive Shaft 174mm for GY6 125/150cc 4-stroke QMJ152/157 engines.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Clutch drive shaft.

•    1x Clutch Drive Shaft L: 174mm (6.85 in)
•    Splines: 19 / Teeth Gear: 15 / Thread Size: M12x1.25
•    Mid Shaft (smooth) D: 20mm / Bearing Connection End D: 12mm
    Fit Clutch120mm / Sheave34mm Nuts: M12M28 / Washer: M12 Bearing Funnel43mm / Bell Spline: 19 / Socket: 17mm39mm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Clutch Springs: 1k1.5k2k rpm
•    Fit Belt Size: 743835842-20-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+

Supported Models: Ban Jing CVT KIT (Part# 169-500); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, Genuine Buddy, Kymco, Vento

-----
Item Weight & Product Dimensions:
•    1.231 Pounds | 6.85" (L) x 0.787" (W) x 0.472" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
G- Clutch Drive Shaft 174mm (GY6)
  • Stock: 40
  • Part #: 164-132
Sold: 5
Views: 6641
$20.95
Price in reward points: 21

Included