Main Menu
Your Cart

Dowel Pins


Crankcase Attribute:
1.    Bearing 6002
2.    Bearing 6004
3.    Bearing 6301
4.    Brake Drum Actuator Dust Cover
5.    Brake Shoe
6.    Brake Shoe Anchor O-Ring 7.5X15
7.    Brake Shoe Anchor Pin
8.    Brake Shoe Arm
9.    Brake Shoe Cam
10.    Brake Shoe Spring
11.    Breather Tube
12.    Bushing 20x8x19
13.    Bushing Engine Hanger 26x10x25

14.    Crankcase (left)
15.    Crankcase (right)
16.    Crankcase Gasket (right)
17.    Dowel Pins 8x14
18.    Dowel Pins 10x14
19.    M6x50 Bolts
20.    M8 Nut
21.    M8x187.5 Studs
22.    M8x195.5 Studs
23.    M12 Washer
24.    M12x1.5 Bolt
25.    Oil Seal 19.8x30x5
26.    Oil Seal 27x42x7


Scooter 4-stroke cylinder crankcase, CVT, and transmission dowel pins. Engine Cylinder Dowel Pins Sizes 10mm x 14mm, 10mm x 16mm, 10mm x 20mm, and 8mm x 14mm. CVT/Transmission Dowel Pins Sizes 8mm x 10mm and 8mm x 14mm.

Brand: G Model: 151-139
Description: G- Dowel Pins 8mm x 10mm Set aka “guide pins” for 139QMB camshaft holder, cylinder head, cylinder base, cylinder studs, CVT, rt crankcase, timing cover, and transmission cover. Also, will fit GY6 125/150cc except for top-end assembly include cylinder studs which requires 10mm x 10mm dow..
$2.00
Brand: G Model: 1100-1140
Description: G- Dowel Pins 8mm x 14mm Set aka “guide pins” for 139QMB camshaft holder, cylinder head, cylinder base, cylinder studs, CVT, rt crankcase, timing cover, and transmission cover. Also, will fit GY6 125/150cc except for top-end assembly include cylinder studs which requires 10mm x 14mm dow..
$2.95
Brand: G Model: 1100-1071
Description: GY6 Dowel Pins 10mm x 14mm Set guide pins for GY6 cylinder studs, cylinder base, cylinder head, and camshaft holder. Include a set of 4 pieces 10mm x 14mm dowel pins.NOTE: Each dowel pins work in pairs to secure each crankcase component listed. Will need a total of 6-pieces. 10mm x 14mm..
$4.99
Brand: Taida Model: GY6-DP-1020
Description: Taida Base Dowel Pins 10mm x 20mm Set (left-crankcase base lower and upper) support for GY6 205cc-232cc+. Replace standard base dowel pins 10mm x 14mm for 10mm x 20mm (6mm extended length). Needed with big bore kits 6mm spacer, extended cylinder height, over-sized cylinder head 4-valve,..
$9.95
Showing 1 to 4 of 4 (1 Pages)