Search

Description: Bel-Ray Gear Saver Transmission Oil aka gear oil available in 75W or 80W weights. Bel-Ray Gear Saver Transmission Oil has been developed for the unique demands of all scooter transmissions equipped with wet clutches. Bel-Ray Gear Saver Transmission Oil flows freely for better ..

Description: Bel-Ray Gear Oil Hypoid Gear Saver aka transmission oil is specially formulated to provide the best performance and wear protection for independently lubricated motorcycle transmissions and final drives. Shock loading normally associated with final drives is reduced when using Bel-..

Description: GY6 125/150 camshaft 2 Valve. Ideal cam for scooters with strong mid-range power output. Specifications: Include the following Camshaft.•    Intake Lobe at its Greatest: 26mm •    Exhaust Lobe at its Greatest: 25.8mm•    Sprocket Teeth: 34•&n..

Description: Counter Shaft Gear 13*42 pre-pressed aka countershaft reduction gear for GY6 125/150cc 4-stroke engines. These gears original replacement (13/42 teeth) only.NOTE: Already pre-pressed countershaft gear 13*42 on counter shaft. No need for A 12-ton hydraulic compressor. Just pop ..

Description: Counter Shaft Gear 15*52 pre-pressed aka countershaft reduction gear for direct stock replacement of 139QMB 49/50cc 4-stroke shortcase engines.NOTE: Already pre-pressed countershaft gear 15*52 on counter shaft. No need for A 12-ton hydraulic compressor. Just pop out stock counter s..

Description: Counter Shaft Gear 16*40 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications: Include the following Transmission gear set.•    1x Front Counter Shaft Teeth: 16 / Spline L: 20mm / OD: 15mm&..

Description: Base Dowel Pin 10mm x 20mm Set (left-crankcase base lower and upper) support for GY6 205cc-232cc+. Replace standard base dowel pins 10mm x 14mm for 10mm x 20mm (6mm extended length). Needed with big bore kits 6mm spacer, extended cylinder height, over-sized cylinder head 4-valve, a..

Description: Final Drive Gear 37 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models. Specifications: Include the following Final drive gear.•    1x Rear Final Drive Gear Teeth: 37 / Inner Spline: 24•    OD..

Description: Final Drive Gear 51 Teeth direct stock replacement for 139QMB 49/50cc 4-stroke shortcase engines. The final drive ratio is the last bit of gearing between your transmission and the driven wheels. In general, a lower final drive ratio will lead to less torque at the wheels but higher top..

Description: Final Drive Gear 52 Teeth direct stock replacement for 139QMB 49/50cc 4-stroke longcase engines. The final drive ratio is the last bit of gearing between your transmission and the driven wheels. In general, a lower final drive ratio will lead to less torque at the wheels but higher top ..

Description: Final Drive Shaft 220mm aka the rear wheel axle with Final Drive Gear for GY6B 150cc 4-stroke ZNEN engines commonly found in Lance Phoenix, Flyscooters Cadenza, ZNEN ZN150T-18, Xingyue ITA-150, Motorino Cassini, CMS Prodigy, BMS Pathfinder, and many more.Specifications:Include the ..

Description: Gear Set 14*36 has a 16% increase up gear ratio over the stock gear set (13*40 teeth). Which will provide higher top-end speed without losing power on acceleration. Since the GY6 125/150cc transmission stock gear teeth are 13*40 which = gear ratio 3.076:1 this means the stock gear ..

Description: Gear Set 14*38 has a 11% increase up gear ratio over the stock gear set (13*40 teeth). Which will provide higher top-end speed without losing power on acceleration. Since the GY6 125/150cc transmission stock gear teeth are 13*40 which = gear ratio 3.076:1 this means the stock gear ..

Description: Gear Set 15*42 for Honda Dio\Elite. The final drive ratio is the last bit of gearing between your transmission and the driven wheels. In general, a lower final drive ratio will lead to less torque at the wheels but higher top speed. Meanwhile, a higher ratio will result in the opposite,..

Description: Gear Set 16*36 has a 27% increase up gear ratio over the stock gear set (13*40 teeth). Which will provide higher top-end speed without losing power on acceleration. Since the GY6 125/150cc transmission stock gear teeth are 13*40 which = gear ratio 3.076:1 this means the stock ..

Description: Gear Set 17*36 has a 31% increase up gear ratio over the stock gear set (13*40 teeth). Which will provide higher top-end speed without losing power on acceleration. Since the GY6 125/150cc transmission stock gear teeth are 13*40 which = gear ratio 3.076:1 this means the stock gear ..

Description: Gear Set 17*41 for Honda Dio\Elite. Get the most out of your big bore kit, with increased top speed and a more usable rev range performance. The final drive ratio is the last bit of gearing between your transmission and the driven wheels. In general, a lower final drive ratio will lead ..

Description: Gear Set 18*35 has a 36% increase up gear ratio over the stock gear set (13*40 teeth). Which will provide higher top-end speed without losing power on acceleration. Since the GY6 125/150cc transmission stock gear teeth are 13*40 which = gear ratio 3.076:1 this means the stock gear ..

Description: Kick Starter Gear aka kickstarter gear for GY6 125/150cc 4-stroke QMJ152/157 engines and GY6B 150cc 4-stroke ZNEN engines. This kickstart gear attaches to the crankshaft's variator side.Specifications: Include the following Kickstarter gear.•    1x Kick Starter Gear Teeth..

Description: Kick Starter Gear Idle for GY6 125/150cc 4-stroke QMJ152/157 engines and GY6B 150cc 4-stroke ZNEN engines.NOTE: Does not include shaft assembly. For complete Kick Starter Gear Idle Assembly see Part# 164-207.Specifications: Includes the following Kickstarter idle gear assembly..

Description: Kick Starter Gear Idle with Shaft for GY6 125/150cc 4-stroke QMJ152/157 engines and GY6B 150cc 4-stroke ZNEN engines.Specifications: Includes the following Kickstarter idle gear and Shaft assembly.•    1x Kick Starter Gear Idle Teeth: 37 / L: 98mm / ID: 12mm / H..

Description: Kick Starter Gear Spindle 5.10" aka kickstart gear quadrant for GY6 125/150cc 4-stroke QMJ152/157 engines and GY6B 150cc 4-stroke ZNEN engines.Specifications: Includes the following Kickstarter gear kick spindle assembly.•    1x Kick Starter Gear Spindle Teeth: 15 / ..