Main Menu
Your Cart

Malossi Variator 95mm Multivar Set (Metro, Ruckus GET)

Malossi Variator 95mm Multivar Set (Metro, Ruckus GET)

Description: Malossi Variator 95mm Multivar Set for Metropolitan, Honda Ruckus 49/50cc 2-Stroke Scooters. The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package is a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range. This kit is designed to improve acceleration on stock, untuned scooters.

NOTE: Does not fit Fuel Injected models. Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling. Most parts also will fit Honda DIO's CVT.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications: 

Includes the following Variator, Variator boss, Boss shim, Variator ramp plate, Variator slides, and Roller weights.

1.    Includes Variator, Boss, Roller weights, Variator housing, Variator slides, Variator top
•    1x Alumin-Alloy Housing ID: 20mm / OD: 95mm / H: 31mm
•    1x Stainless Steal Boss L: mm / ID: mm / OD: 20mm
•    1x Boss Shim ID: mm / OD: 20mm / H: mm
•    1x Limiter Spacer
•    1x Metal Top ID: mm / OD: mm / H: mm
•    12x Roller Weights (black): 16x13mm 6gm
•    3x Plastic Slides (red)
•    Made in Italy
    Fit Lock: Bracket
•    Fit Variator Shims: 20mm / Drive Spline: 26
    Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 660-18-28 (Fit Metro ONLY)
•    Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GET 49/50cc

Supported Models: NCY CVT Kit (Part# 1200-1220); Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, Zoomer 50cc, and virtually any scooter engine with these measurements.

-----
Item Weight & Package Dimensions:
•    0.606 pounds | 3.740" (OD) x 3.202" (ID) x 1.288" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Malossi Variator 95mm Multivar Set (Metro, Ruckus GET)
  • Stock: 40
  • Reward Points: 3
  • Part #: 5111852
Sold: 0
Views: 632
$81.55
Price in reward points: 82

Included