Naraku Cylinder 52.4mm 94.9cc 2V Cast Big Bore Kit Duo Combo (139QMB)












Description: High-Quality Naraku Cast-Iron Cylinder 52.4mm 94.9cc with Forged Aluminum Piston offers better durability and reduced friction for 139QMB 49/50cc + engines. The cylinder bore is 52.4mm. Naraku Cylinders' Combo 52.4mm 94.9cc 2V w/Cast Piston including the following parts Naraku 52.4mm (94.9cc) cylinder kit with cast piston and Naraku oversize 2V head 23/20. Naraku Cylinders' Combo 52.4mm 94.9cc 2V is suitable for all air-cooled 4 strokes, 49-50cc Kymco engines (scooters), and most Chinese imported vehicles 49/50cc (scooters, quads, and buggies).
When used in conjunction with a stock stroke of 41.4mm the engine displacement comes out to 89.3cc! When used with a 44mm stroker crank, engine displacement = 94.9cc!
NOTE: Please, measure with a caliper 139QMB crankcase bore (opening) for 52.4mm cylinder outer diameter sleeve 54.45mm need a minimum 54.5mm bore clearance or boring and machining are required. If, engine case must be bored, order an engine bore tool (Part# 1400-1001). Most stock 139QMB cylinder head's valve height is 69mm which comes standard with its 69mm rockerarm. This Naraku Cylinder Head's valve height is 64mm and will work only with a 64mm rockerarm only. If you need a set of 64mm rockerarm see Part# 151-101 sold separately.
Specifications:
100% Naraku Products – NO SUBSTITUTE.
Includes the following Cylinder, Base gasket, Piston, Rings, Piston pin, Circlips, Cylinder head, Head gasket, Exhaust gasket.
1. Includes Naraku Cylinder 52.4mm 2V, Piston + Rings, Gaskets (chain tensioner gasket, base gasket, steelhead gasket), Wrist pin, and Circlips.
• 1x Cast-Alumin Piston: 51.88mm
• 5x Piston Rings (installed): 52.4mm
• 1x Wrist Pin w/G-clips: 41mm x 13mm x 8.3mm
• 1x Cast-Iron Cylinder: 52.4mm
• Outer Sleeve Diameter 54.45mm
• Cylinder Height (w/o sleeve): 53mm
• Overall Height (w/sleeve): 70.3mm
2. Includes Naraku Cylinder Head 52.4mm 2V NON-EGR, Valve Assembly.
• 1x Cylinder Head Stud Space: 50mm / H: 60mm / Intake Port: 20.8mm / Exhaust Port: 18.7mm
• 2x Valves: 23x64mm Intake / 20x64mm Exhaust / Stem: 5mm / (w/intake valves) H: 66.1<67.3mm
• 6mm Intake Threads
• 6mm Exhaust Threads
• Made in Taiwan
-----
• Fit 6mm Intake Studs
• Fit 6mm Exhaust Studs
• Fit 64mm Rocker Arm Assembly 2V
• Fit 50mm Stud Spacing /Diagonal 70.5mm
• Fit Crankshaft 41.4mm to 44mm
• Fit Dowel Pin Set (8x14mm)
• Fit QMB 49/50cc+
Supported Models: GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, RoughHouse, SYM, TaoTao
-----
Item Weight & Product Dimensions:
• 1.437 Pounds | 4.463" (L) x 4.156" (W) x 2.767" (H)
• 2.194 Pounds | 5.322" (L) x 5.290" (W) x 2.610" (H)