Main Menu
Your Cart

NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)

NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)
NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)
NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)
NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)

Description: NCY Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500rpm compression spring is specifically for the Aprilia, JOG, and Zuma 50.

Compatible with sport clutches on the market works on Yamaha Zuma, Minarelli Jog engines, Chinese Yamaha Clones such as the 1PE40QMB 1E40QMB engines, Malaguti, CPI, as well as Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303 and Peirspeed Scooters.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.

Specifications:

Include the following Compression spring.

•    1x Spring Comp: 1,500 RPM / L: 108mm
•    Spring ID: 44mm / OD: mm
•    Wire Gauge: 4mm
•    Made in Taiwan
•    Fit Belt Size: 818 (Fit Aprilia ONLY)
•    Fit Belt Size: 788 (Fit JOG ONLY)
•    Fit Belt Size: 784.5 (Fit Zuma 50 ONLY)
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x14mm)
•    Fit Aprilia 50
•    Fit Jog 50
•    
Fit Zuma 50

Supported Models: NCY CVT KIT (Part# 1200-1197); Yamaha C3, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino Minarelli Jog engines, Chinese Yamaha Clones 1PE40QMB 1E40QMB engines, Malaguti, CPI, Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303, and Peirspeed Scooters.

-----
Item Weight & Product Dimensions:
•   0.212 Pounds | 4.173" (L) x 2.291" (W) x 1.909" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Compression Spring 1500 RPM (Aprilia, JOG, Zuma 50)
  • Stock: 40
  • Part #: 1200-1012
Sold: 0
Views: 223
$15.95
Price in reward points: 16

Included