NCY Drive Face Fan 117mm (Honda PCX)

Description: NCY Drive Face Fan 117mm for Honda PCX 125/150. This drive face fan is a MUST when upgrading your CVT components!

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Drive face fan.

•   1x Aluminum Drive Face Fan Weight Weight: 133gm / OD: 117mm
•    Splines: 28 / ID: 14.1mm<15mm / H: 22.4mm
•    Made in Taiwan
•    Fit Variator Housing: 117mm / Weights: 20x15mm / Slides: 3 / Shims: 24mm / Top: 90mm
•    Fit Variator Shaft Nut: M14 / Washer: M14 / Socket: 22mm
•    Fit Belt Size: 816, 836-22-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit PCX 125/150cc

Supported Models: NCY CVT KIT (Part# 1200-1195); Honda PCX 125/150 (2010 and newer)

-----
Item Weight & Product Dimensions:
•    0.293 pounds | 4.602" (OD) x 0.555" (ID) x 0.881" (H)