NCY Drive Face Fan (Vino, Zuma 125)

Description: Good quality hand-made drive face fan by NCY for Yamaha Vino 125 and Zuma 125 / BW's 125 scooters. This drive face fan is a MUST when upgrading your CVT components!

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Drive face fan.

•    1x Aluminum Drive Face Fan OD: 117.5mm
•    Splines: 15 / ID: 14.2<16mm
•    Made in Taiwan
•    Fit Dowel Pin Set (8x14mm)
•    Fit Belt Size: 759-22-30 (Vino)
•    Fit Belt Size: 810-22-28 (Zuma)
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125.

-----
Item Weight & Product Dimensions:
•    0.319 pounds | 4.626" (L) x 4.626" (W) x 1.496" (H)