NCY Secondary Bearing Spring Seat (GY6)
Description: Very nice quality Secondary Spring Seat by NCY for GY6 scooters. This bad boy allows your belt to release nice and smoooooooth.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Includes the following Bearings, Bearing cover, Bearing seat, and Secondary seat funnel.
• 1x Secondary Seat Funnel ID: 43.3mm / OD: 45<48.6mm / H: 37.20mm
• 1x Bearing Cover ID: 46.25mm / OD: 57.2mm / H: 2.55mm
• 1x Bearing Seat ID: 46.3mm / OD: 59.95mm / H: 6.2mm
• 1x Bearings Pak
• Made in Taiwan
• Fit Dowel Pin Set (8x14mm)
• Fit Belt Size: 743, 835, 842
• Fit 54mm Stud Spacing (A-Block)
• Fit 57mm Stud Spacing (B-Block)
• Fit GY6 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1048-1); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento
Item Weight & Package Dimensions:
• 0.15 Pounds | 8.3" (L) x 6.7" (W) x 1.69" (H)
Sorry, this video is NOT dubbed in English. Khmer speaking only.