NCY Variator 117.5mm Coated Gold (Vino, Zuma 125)
Description: The ultimate variator for your Vino or Zuma 125 transmission! This beauty is lighter than any other variator on the market and is ideal for all types of riding. The specially coated roller tracks prevent debris accumulation that causes roller weights to flat spot, leading to extended roller weight life and consistently smooth transitions.
NOTE: Recommend using a new belt with this kit. Belt and the belt drive facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer's variator torque specs.
Includes the following Variator housing.
• 1x Alumin-Alloy Housing Teflon Coated ID: 20.9mm / OD: 117.5mm
• Made in Taiwan
• Fit Dowel Pin Set (8x14mm)
• Fit Belt Size: 759-22-30 (Vino)
• Fit Belt Size: 810-22-28 (Zuma)
• Fit Vino 125
• Fit Zuma 125
Supported Models: NCY CVT KIT (Part #1200-1047); Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125.
Item Weight & Product Dimensions:
• 0.538 pounds | 4.626" (L) x 4.626" (W) x 1.496" (H)