NCY Variator 117mm Coated Gold Set (Honda PCX)
Description: NCY Variator 117mm Coated Gold Set for Honda PCX 125/150cc and Honda SH125i/SH150i. This Set increases acceleration and lowers the vibration that is characteristic of the factory Honda PCX variator.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Includes the following Variator, Variator ramp plate (top), and Variator slides.
• 1x Alumin-Alloy Housing Teflon Coated ID: 24mm / OD: 116.84mm / H: 37.74mm
• 1x Metal Top ID: 15mm / OD: 90mm / H: 20.74mm
• 3x Plastic Slides (black) ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm
• Made in Taiwan
• Fit Variator Shaft Shims: 24mm / Nut: M14 / Washer: M14 / Drive Spline: 28 / Socket: 22mm
• Fit 6x Roller Weights: 20x15mm
• Fit Dowel Pin Set (8x10mm)
• Fit Belt Size: 816, 836-22-30
• Fit PCX 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1195); Honda PCX 125/150, Honda SH125i/SH150i
Item Weight & Product Dimensions:
• 1.025 pounds | 4.6" (OD) x 0.944" (ID) x 1.47" (H)