NCY Variator 95mm (Metro, Ruckus GET)
Description: NCY Variator for Metropolitan 2012 & older and all U.S. Honda Ruckus GET transmission! This variator is lighter than the stock variator on the market weight at 17.3oz and a 95mm outer diameter drive face is ideal for improved lighter weight stock replacement non-coated pulley variator.
NOTE: Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Variator housing.
• 1x Alumin-Alloy Housing ID: 20mm / OD: 95mm / H: 31mm
• Made in Taiwan
• Fit 3x Plastic Slides
• Fit 6x Roller Weights: 16x13mm
• Fit Metal Top OEM ID: mm / OD: mm / H: mm
• Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
• Fit Belt Size: 660-18-28 (Fit Metro ONLY)
• Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
• Fit Dowel Pin Set (8x10mm)
• Fit GET 49/50cc
Supported Models: NCY CVT Kit (Part# 1200-1220); Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, Honda Zoomer NPS50, and virtually any scooter engine with these measurements.
Item Weight & Product Dimensions:
• 0.368 pounds | 3.505" (OD) x 3.202" (ID) x 1.288" (H)