Main Menu
Your Cart

NCY Variator Slide Set (Honda PCX)

NCY Variator Slide Set (Honda PCX)
NCY Variator Slide Set (Honda PCX)
NCY Variator Slide Set (Honda PCX)
NCY Variator Slide Set (Honda PCX)

Description: NCY Variator Slide Set for Honda PCX 125/150cc 4-stroke engines. The slide pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers. The NCY Variator Slides are made of the same abrasion-resistant nylon as the Dr. Pulley Roller Weights, which promises a long life.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

•    3x Plastic Slides ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm
•    Made in Taiwan
•    Fit Variator Housing: 117mm / Weights: 20x15mm / Shims: 24mm / Top: 90mm Drive Spline: 28
    Fit Variator Shaft Nut: M14 / Washer: M14 / Socket: 22mm
•    Fit Dowel Pin Set (8x10mm)
•    Fit Belt Size: 816836-22-30
•    Fit PCX 125/150cc

Supported Models: NCY CVT KIT (Part# 1200-1195); Honda PCX 125/150cc (2010 and newer)

-----
Item Weight & Package Dimensions:
•    0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Variator Slide Set (Honda PCX)
  • Stock: 36
  • Part #: 1200-1192
Sold: 5
Views: 2070
$7.99
Price in reward points: 8

Included