Polini Roller Weight Tuning Kit (DIO, GET, QMB, Vespa 50)
Description: Polini Roller Weight Tuning Kit for Honda DIO/Elite, Honda GET, 40QMB Minarelli JOG, and 139QMB 4-stroke engines, Piaggio Liberty/Sport 50, Vespa ET2, Vespa Primavera 50, Vespa Sprint 50, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino 50, and many more models listed below. Polini has revised and expanded its range of roller kit made for Scooter Variator. The set consists of 4x 6 Core Weights (gold) and 12x wear-resistant plastic shells that are not affected by temperature changes. The set comes in a shatter-proof box.
Compatible with most variator roller's housing on the market works on Yamaha JOG Minarelli engines, Chinese Yamaha Clones such as the 1PE40QMB 1E40QMB engines, Honda Ruckus, 139QMB 50cc 4 stroke engines, Vertical Honda DIO style 2 stroke engines found in SYM and Kymco Scooters, as well as Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303 and Peirspeed Scooters.
NOTE: These kits are for tuning only and are not intended for permanent use.
Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Includes the following Roller weights and Shell set.
• 12x Wear-Resistant Plastic Shell Sizes (choose one): 15x12mm, 16x13mm, 19x15.5mm
• 24x Brass-Gold Core Weights (choose set): 4/ech. 6 core weights
• 1x Plastic Compartment Case
• Made in Italy
• Fit Weight Size: 15x12mm (Fit 40QMB, Yamaha ONLY)
• Fit Weight Size: 16x13mm (Fit DIO, GET, 139QMB ONLY)
• Fit Weight Size: 19x15.5mm (Fit Piaggio, Vespa ONLY)
• Fit Belt Size: 654 (Fit DIO ONLY)
• Fit Belt Size: 660, 785 (Fit GET ONLY)
• Fit Belt Size: 669, 729, 788 (Fit 139QMB ONLY)
• Fit Belt Size: 788-17-30 (Fit 40QMB, JOG ONLY)
Supported Models: Aprilia Mojito 50, Aprilia Scarabeo 50, Aprilia SR50, 139QMB GY6 49cc-50cc 4-stroke engines, Filly 50, Genuine Buddy 50, Genuine RoughHouse, Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Honda GET, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, 40QMB Minarelli JOG 50cc 2-stroke, 50QMF 90cc-100cc, QLink, Peugeot, Piaggio Fly 50, Derbi Atlantis 02 50, Derbi GP1 50, Piaggio Liberty 50, Piaggio Sport 50, Piaggio Typhoon 50, Piaggio Zip 50, SYM 50, TaoTao 50, Vespa ET2, Vespa Primavera 50, Vespa Sprint 50, Yamaha Grand Axis 100, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino 50, Yamaha C3, and virtually any scooter engine with these measurements.
Item Weight & Product Dimensions:
• 0.5 pounds | 9.5" (L) x 6" (W) x 0.655" (H)