Polini Variator w/Comp Spring Kit (Honda PCX)
Description: Polini Maxi Speed Performance Variator Kit for Honda PCX 125cc and 150cc Scooters. This kit has 9 roller weights versus the factory 6 to increase acceleration and lower the vibration that is characteristic of the factory Honda PCX variator.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Includes the following Variator, Variator boss, Variator ramp plate (top), Variator slides, Roller weights, Compression torque Spring, and a tube of High-temp grease.
1. Includes Variator, Boss, Roller weights, Variator housing, Variator slides, Variator top
• 1x Alumin-Alloy Housing ID: 23mm / OD: 117mm / H: mm
• 1x Stainless Steal Boss
• 1x Metal Top ID: 15mm / OD: 90mm / H: 20.74mm
• 9x Roller Weights (black): 20x12 9.2gm
• 3x Plastic Slides (black) ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm
2. Includes Compression Torque Spring, Compression Torque Spring
• 1x Spring Comp (blue): 15% Stiffer Than Stock / L: 154mm
• Made in Italy!
• Fit Belt Size: 816, 836-22-30
• Fit PCX 125/150cc
Supported Models: NCY CVT KIT (Part# 1200-1195); Honda PCX 125/150 (2010 and newer)
Item Weight & Package Dimensions:
• 0.838 pounds | 4.528" (L) x 4.528" (W) x 1.496" (H)
• 0.172 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)
• 0.294 Pounds | 6" (L) x 2.291" (W) x 1.909" (H)