Stage6 Clutch Torque Control MKII 107mm (Minarelli, Yamaha)
Description: Stage6 Clutch Torque Control MKII 107mm for Yamaha Zuma 50cc, Minarelli 50cc 2-stroke scooters. The improved version of the very successful Stage6 Torque Control Clutch. In order to cater for the performance of the new R/T cylinder, the linings have been enlarged and the weight of the clutch shoe increased. Unlike the weights of the MKII's predecessor, which had to be screwed on, these ones can simply be slipped on.
Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Includes the following Clutch housing, Clutch springs, and Clutch weights.
• 1x Clutch ID: mm / OD: 107mm / H: mm / W: gm
• 3x Clutch Spring (red)
• 3x Clutch Spring (white)
• 3x Clutch Weights
• Made in Italy
• Fit Clutch Nut: M28 / Socket: 39mm
• Fit Aprilia
• Fit Minarelli
• Fit Yamaha
Supported Models: Aprilia 100 Scarabeo 2T (Minarelli Yamaha), Yamaha Aerox, Yamaha Neo's, Yamaha BW'S, BW'S100, Yamaha YW100, YW100SWC, YW100A, YW100B, and YW100D, Various unlisted makes/models
Item Weight & Product Dimensions:
• 1.38 pounds | 4.212" (OD) x 2.430" (ID) x 1.181" (H)