Stage6 CVT Belt PRO ATV Short (Minarelli)
Description: Stage6 CVT Belt PRO ATV Short for ATV, and Minarelli 50cc engine. The Stage6 Pro drive belt is an inexpensive high-quality drive belt produced by Bando in Japan. It has optimized grip characteristics that guarantee excellent power transmission.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• 1x CVT Belt PRO
• Nylon Reinforced Material
• Length: mm (Loop in.)
• Top Width: mm ( in.)
• Groove Angle: º
• Made in Italy
• Fit JOG 50
• Fit QMB 40
Supported Models: 1PE40QMB Minarelli Jog 50cc engines, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.25 pounds | 15.511” (L) x 0.669” (W) x 0.354” (H)