Stage6 CVT Belt R/T Oversize 805-16.1-30 (Aprilia, Piaggio, Vespa 50)
Description: Stage6 CVT Belt R/T Oversize 805-16.1-30 for Aprilia, Piaggio 50, Vespa 2-stroke engines. High-quality oversize racing drive belt with kevlar fibers; excellent performance and, thanks to a unique compound, very good grip. This belt has been developed by Stage6 specifically for Oversize CVT systems and is therefore a great upgrade for the Stage6 R/T CVT system, getting you ready for high-speed racing in the circuit as well as sprint races! Excellent results have also been achieved in conjunction with other well-known manufacturers. w18.6 / h10 / l805 with 30deg angle.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• 1x CVT Belt Oversize
• Nylon Reinforced Material
• Length: 805mm (Loop 31.69in.)
• Top Width: 16.1mm ( 0.63in.)
• Groove Angle: 30º
• Made in Italy
• Fit Aprilia 49/50cc
• Fit Piaggio 49/50cc
• Fit Vespa 49/50cc
Supported Models: Aprilia Mojito, Aprilia Scarabeo 4T, Aprilia Sport City One, Aprilia Sr R Factory, Aprilia Sr Street, Piaggio Fly, Piaggio Typhoon, Piaggio Vespa, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.25 pounds | 15.511” (L) x 0.669” (W) x 0.354” (H)
From Same Category
- Stock: 40
- Reward Points: 2
- Part #: S6-5914025