Stage6 CVT Oversize R/T Kit (Aprilia, JOG, Zuma 50 longcase)

Description: Stage6 CVT Oversize R/T Kit for Aprilia, JOG, Zuma 50, and many other 50cc base engines. The Stage6 R/T Oversize the CVT system. Enlarged CVT systems that extend the complete transmission range have become essential for race and midrace engines. Included in the delivery are the complete Stage6 R/T Oversize variator, the Stage6 R/T Torque Boost torque driver kit, and the Stage6 R/T Oversize drive belt.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Variator, Variator boss, Variator drive face, Belt, and Belt pulley.

1.    Include Stage6 Drive Face, Drive Face.
•    1x Aluminum CNC Machined Drive Face
•    Splines:  / ID: mm / OD: mm
2.    Includes Stage6 Variator, Roller weights, Variator boss, Variator housing, Variator slides, and Variator top.
•    1x Alumin-Alloy Housing ID: mm / OD: mm / H: mm
•    1x Stainless Steel Boss L: mm / ID: mm / OD: mm
•    1x Metal Top ID: mm / OD: mm / H: mm
•    6x Black Roller Weights: 19x15.5mm 3.5g
•    3x Plastic Slides (Black)
3.    Includes Stage6 Secondary Slider, slider (torque driver), and O-rings.
•    1x Secondary Slider Plate OD: mm / Funnel ID: mm / OD: / H: mm
•    2x Rubber O-rings
4.    Include Stage6 CVT Drive Belt,
•    CVT Drive Belt: 
•    Made in Italy
5.    Include Stage6 Compression Spring
•    Compression Spring
•    Made in Italy
•    Fit Aprilia 50
•    Fit JOG 50
•    Fit Zuma 50

Supported Models: APEX Pro MXR 50, Aprilia SR 50 LC, Benelli 491 RR 50, Benelli K2 50 LC, Beta Ark 50 LC, Beta Eikon 50, Garelli GSP 50, Italjet Dragset 50, KTM Ark 50 LC, MBK Nitro 50, MBK Nitro Naked 50, Malaguti F12 Phantom 50 LC, Malaguti F15 Firefox LC, Motowell Magnet RS 50, Streak Access 50, Yamaha Aerox 50, Yamaha Jog RR 50, and virtually any other scooter engine with these measurements.

-----
Item Weight & Package Dimensions:
•    6.96 pounds | 19.75" (L) x 18.25" (W) x 4.75" (H)