Stage6 Drive Face R/T Oversize w/Fan (Aprilia, Piaggio, Vespa 50)

Description: Stage6 Drive Face R/T Oversize with Fan for Aprilia, Piaggio 50, Vespa 2-stroke engines. The R/T front pulley has been developed specifically for the R/T Oversize CVT kit, forming a drive train with better performance and better power transmission. The pulley's angle has been adjusted to the R/T variator, but the pulley can also be used with the SportPro variator. Also included in the delivery is the Stage6 R/T fan.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

•    1x Aluminum CNC Machined Drive Face Weight: gm
•    ID: mm / OD: mm / H: mm
•    Made in Italy
•    Fit Aprilia 49/50cc
•    Fit Piaggio 49/50cc
•    Fit Vespa 49/50cc

Supported Models: Aprilia Mojito, Aprilia Scarabeo 4T, Aprilia Sport City One, Aprilia Sr R Factory, Aprilia Sr Street, Piaggio Fly, Piaggio Typhoon, Piaggio Vespa, Various unlisted makes/models

-----
Item Weight & Product Dimensions:
•    0.212 pounds | 3.688” (OD) x 0.551” (ID) x 0.787” (H)