Main Menu
Your Cart

Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)

Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)
Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)
Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)
Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)

Description: Stage6 Variator Slide Sport PRO Set for Aprilia, Piaggio 50, Vespa 2-stroke engines. Replacement parts for Stage6 pro variator.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

•    3x Plastic Slides
•    Color: White
•    Made in Italy
•    Fit Variator Housing95mm Weights: 19x15mm / Boss: 21mm / Shims: 21mm
•    Fit Belt Size: 748-18-28 (Fit Aprilia ONLY)
•    Fit Belt Size: 
788-18.1-28 (Fit Piaggio ONLY)
•    Fit Belt Size: 738-18.5-28 (Fit Vespa ONLY)
•    Fit Aprilia 49/50cc
•    Fit Piaggio 49/50cc
•    Fit Vespa 49/50cc

Supported Models: Aprilia SR50 Di-Tech LC (2003-13), Aprilia SR50 R Factory Di-Tech LC (2003-13), Gilera Runner 50 Purejet (2005+), Piaggio NRG 50 Purejet LC (2005+), Vespa ET2, Various unlisted makes/models

-----
Item Weight & Package Dimensions:
•    0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Stage6 Variator Slide Sport PRO Set (Aprilia, Piaggio, Vespa 50)
  • Stock: 40
  • Part #: S6-58ET001
Sold: 0
Views: 171
$11.15
Price in reward points: 12

Included