Taida Crankshaft 52.6mm 3000 Stroker (Honda Dio)

Description: High-Quality Taida Crankshaft 52.6 for Honda Dio (AF16-AF18E) engines. This crankshaft allows you to go up to 130cc with Taida Cylinder 56mm Big Bore Kits (Part #DIO-01056).

NOTE: THIS IS NOT FOR EARLY MODEL (PRE-1994) AF05E Engines.
Boring and machining may require.

Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the crankshaft bearing side will be placed, in order to fit immediately the freezing Taida Crankshaft bearing side. Users assume full responsibility and risk doing so using this Taida Crankshaft.

Specifications:

•    Base Stroke: 49.6mm +3mm (3000-microns)
•    Overall Stroke: 52.6mm
•    Overall Length: 202.438mm
•    Flywheel Diameter: 79.5mm
•    Piston Wrist Pin Slot ID: 17mm
•    Flywheel Shaft Thread: M10 x 12mm
•    Variator Shaft Thread: M12 x 13mm
•    Variator Shaft Splines: 26
•    Piston Wrist Pin Slot Needle ID: 12mm
•    Made in Taiwan
•    Fit Needle Bearing: 17x12x13mm
•    Fit Variator Shaft Bearing I.D: 20mm
•    Fit Taida Cylinder 52.5mm to 56mm
•    Fit DIO 50/90cc+ BORE

Supported Models: Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50

-----
Item Weight & Package Dimensions:
•    3.93 pounds | 10.5" (L) x 5" (W) x 3.5" (H)