Description: Cam Chain Tensioner Gasket for GY6 125/150cc 4-stroke with engine model #'s 152QMI and 157QMJ and GY6 150cc 4-stroke ZNEN engines commonly found in Bintelli, Gorilla Motor Works (GMW), and Puma scooters.Specifications:Include the following Tensioner gasket.• 1x Cam Cha..
Description: GY6 125/150 camshaft 2 Valve. Ideal cam for scooters with strong mid-range power output. Specifications: Include the following Camshaft.• Intake Lobe at its Greatest: 26mm • Exhaust Lobe at its Greatest: 25.8mm• Sprocket Teeth: 34•&n..
Description: Camshaft Cover Gasket for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Camshaft cover gasket.• 1x Camshaft Cover Gasket ID: 94mm / OD: 97.2mm / Thickness: 3.2mm• &n..
Description: Clutch Bell for CFmoto V3/V5 and CN250 172mm 250cc 4-stroke water-cooled engines.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further aw..
Description: Clutch Drive Shaft for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models. Specifications: Include the following Clutch drive shaft.• 1x Clutch Drive Shaft L: 213mm (8.4 in)• Splines: 16 / T..
Description: Clutch Kit for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face whi..
Description: Clutch Kit for CFmoto V3/V5 and CN250 172mm 250cc 4-stroke water-cooled engines.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further awa..
Description: Counter Shaft Gear 13*42 pre-pressed aka countershaft reduction gear for GY6 125/150cc 4-stroke engines. These gears original replacement (13/42 teeth) only.NOTE: Already pre-pressed countershaft gear 13*42 on counter shaft. No need for A 12-ton hydraulic compressor. Just pop ..
Description: Crankcase 63mm Bore A-Block 54mm GY6 longcase. The crankcase bore is a 63mm opening and can fit 54mm A-Block 61mm cylinder and 61mm cylinder head.NOTE: This is NOT a complete engine. Need to reuse donor parts from A-Block (54mm) or B-Block (57mm) ..
Description: Crankcase Bearing 6002 for GY6 125/150cc 4-stroke engine scooter.Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the bearing will be placed in order to fit immediately the freezing bearing. Users assume full responsibility and risk do..
Description: Crankcase Bearing 6004 for GY6 125/150cc 4-stroke engine scooter.Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the bearing set will be placed in order to fit immediately the freezing bearing. Users assume full responsibility and ris..
Description: Crankcase Bearing 6301 for GY6 125/150cc 4-stroke engine scooter.Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the bearing set will be placed in order to fit immediately the freezing bearing. Users assume full responsibility and ris..
Description: Crankcase Bushing Front aka engine hanger bushing is made of a sturdy metal sleeve and wear-resistant rubber which also makes installing it so much easier with a compressor tool. Crankcase Bushing Front that includes one front crankcase bushing fit either the front left or front right s..
Description: Crankcase Bushing Rear is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing Rear that includes one rear engine shock bushing for 139QMB 49/50cc, GY6 125/150cc crankcase.NOTE: Also, available in Crankcase Bu..
Description: Crankcase Bushing Front Set is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing 2-front Set includes two front crankcase bushings. Interchangeable fit either the front left or front right side of the ..
Description: Crankcase Bushing Set is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing 3-Piece Set includes two front crankcase bushings and one rear engine shock bushing.Specifications: Includes the following Three-pi..
Description: Crankcase Cover Gasket Right for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications: Includes the following Right-side crankcase gasket.• 1x Crankcase Gasket (right) Gasket / Bore: mm• ..
Description: GY6 Crankshaft 57.8mm Standard Stroker assembly for GY6 125/150cc 4-stroke 152QMI / 157QMJ engines.Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the crankshaft bearing side will be placed, in order to immediately fit the frozen cran..
Description: Crankshaft Needle Bearing 15x28x15mm Set of 2 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Needle bearing.• Number of Rollers: 13• Length Steel Cage: 15m..
Description: G- CVK Main Jet 100-140 10-Pcs Kit for 139QMB 49/50cc, GY6 125/150cc+ CVK carburetors, and 250cc 4-stroke water-cooled 172mm carburetors. Includes 10-pieces, size range from #100 - #140.NOTE: Will work on 139QMB CVK carburetor (Part# NK200.06) that accept 5mm main jet ONLY. Most commonl..
Description: G- CVK Main Jet 72-110 10-Pcs Kit for 139QMB 49/50cc+ CVK carburetors. Includes 10-pieces, size range from #72 - #110.Specifications:Includes the following 10 Piece Set (1 of each size main jets).• Main Jet Sizes: 72, 75, 78, 80, 85, 90, 95, 100, 105 & 110 RPM •&nb..
Description: CVK Throttle Cable 76 inches with 45° angle mount for CVK carburetor on 139QMB 49/50cc, GY6 125/150cc+, Honda Ruckus, and many others models of GY6-based Chinese scooters. If you need a longer CVK throttle cable due to that Honda stretch this is it can be used on Honda ruckus with a CVK..