Main Menu
Your Cart

ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)

ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
Non-Stock
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)

Description: ComposiMo GY6 Anklebiter Open CVT Cover! This CVT open cover is CNC Machined from a solid 6061 Aircraft-Grade Billet Aluminum! Also, available in raw silver aluminum (Part# CMO_2_0300_Raw)

Attention! This item does require the removal of the OEM CVT cover, which also removes the OEM kickstart assembly. Be sure your electric starter is in good working order! This part exposes the belt drive of the CVT transmission and allows the pulleys to spin in the open air. 

NOTE: GY6 engine, drive face, clutch bell, and starter motor - not included, sold separately. Caution must be taken when using this product! This is intended for show purposes/off-road use only and should not be used on a public road or highway! You are responsible for any damage this product may cause to you personally or any other objects/personal property.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following CVT Cover Front plate, Back plate, Allen bolts, Washers, and Concave spacers.

•    1x CNC Billet Aluminum #6061 Front Plate L: 17.75" / W: 6.6" / Thick: 0.25"
•    1x Stainless Steel Back Plate L: 18" / W: 6.9" / Thick: 0.09"
•    4x CNC Billet Aluminum #6061 Concave Spacers
•    10x Stainless Steel Allen Bolts w/Washers
•    Made in the U.S.A.
•    Fit Variator: 115mm / Weights: 18x14mm / Slides: 3 / Boss: 24mm / Shims: 24mm / Drive Spline: 19 / Nut: M12 / Washer: M12
    Fit Clutch: 121.8mm / Shaft: 174mm / Sheave34mm / Nuts: M12M28 / Washer: M12 / Bearing Seat45.4mm / Bell Spline: 19 / Socket: 17mm39mm
•    Fit Clutch Springs: 1k1.5k2k rpm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Belt Size: 835842-20-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+ (longcase)

Supported Models: NCY CVT KIT (Part# 1200-1048); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    2.825 Pounds | 18" (L) x 6.9" (W) x 0.5" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
ComposiMo CVT Cover Anklebiter Gloss Black (GY6 longcase)
  • Stock: Non-Stock
  • Reward Points: 8
  • Part #: CMO_2_0300_GlossBlack
Sold: 6
Views: 37423
$215.00
Price in reward points: 215

Included