Ban Jing Clutch Bell 9-Spokes Titanium Coated (GY6, PCX)
Description: Ban Jing Titanium Coated 9 Spoke Clutch Bell/Drum for most Chinese scooter models GY6 125cc-150cc+, Honda PCX 125-150cc (2010 and newer), and many others. Titanium Nitride coating, also known as PVD, is a thin surface treatment that is three times harder than chrome and resists high temperatures, oxidation, and most chemicals.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Clutch bell.
• Splines: 19 / ID: 13.5<15mm / OD: 20mm / H: 25.45mm
• Made in Taiwan
• Fit Clutch Nut: M28 / Socket: 39mm
• Fit Clutch Shaft Nut: M12 / Washer: M12 / Socket: 17mm (Fit GY6 ONLY)
• Fit Clutch Shaft Nut: M12 / Washer: M12 / Socket: 19mm (Fit PCX ONLY)
• Fit Belt Size: 743, 835, 842 (Fit GY6 ONLY)
• Fit Belt Size: 816, 836x22x30 (Fit PCX ONLY)
• Fit Clutch Springs: 1k, 1.5k, 2k rpm
• Fit Compression Spring: 1k, 1.5k, 2k rpm
• Fit Dowel Pin Set (8x10mm)
• Fit GY6 125/150cc+
• Fit PCX 125/150cc+
Supported Models: Ban Jing CVT KIT (Part# 169-500); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento
Item Weight & Product Dimensions:
• 1.481 Pounds | 5.358" (OD) x 4.908" (ID) x 1.720" (H)