Main Menu
Your Cart

Ban Jing Variator 116mm Kit (Honda PCX)

Ban Jing Variator 116mm Kit (Honda PCX)
Ban Jing Variator 116mm Kit (Honda PCX)
Ban Jing Variator 116mm Kit (Honda PCX)
Ban Jing Variator 116mm Kit (Honda PCX)

Description: Ban Jing Variator 116mm Kit with lightweight forged drive face for Honda PCX 125\150cc scooters. This variator uses a unqiue six 20x12 12 gm weight set. Normally, Honda PCX standard 20x15mm weight set, however these are 20x12mm weight set and are sold in packs of eight, so you will have spares on your next weight set purchase.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following 

•    1x Alumin-Alloy Housing ID: 24mm / OD: 116mm / H: 37.74mm
•    6x Roller Weights: 20x12mm 12gm
•    1x Metal Top ID: 15mm / OD: 90mm / H: 20.74mm
•    3x Plastic Slides (white) ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm
•    1x Forged Drive Face Fan Weight: 150gm / OD: 116mm
•    Splines: 28 / ID: 14.1mm<15mm / H: 22.4mm
•    Made in Taiwan
    Fit Variator Shaft Shims: 24mm / Nut: M14 / Washer: M14 Socket: 22mm
•    Fit Belt Size: 816836-22-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit PCX 125/150cc+

Supported Models: Polini CVT KIT (Part# 146-69); Honda PCX 125/150cc 

-----
Item Weight & Package Dimensions:
•    1.106 pounds | 6" (L) x 5" (W) x 4" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Ban Jing Variator 116mm Kit (Honda PCX)
  • Stock: 39
  • Reward Points: 2
  • Part #: 169-534
Sold: 2
Views: 12175
$62.00
Price in reward points: 62

Included