Dr. Pulley Clutch 60° HiT Racing Tune Bell Set (GY6, PCX)

Description: Dr. Pulley's products are some of the best on the market today! This Dr. Pulley HiT Clutch 60° with Racing Tune Bell Set is precision-engineered to increase performance over the stock GY6 clutch set. Dr. Pulley HiT Clutch 181401 with Bell for Scooters with GY6 125cc-150cc+ engines found in Honda PCX 125-150cc (2010 and newer), Kymco, SYM, PGO, and many others.

The Dr. Pulley HiT Clutch 60° Racing Tune Bell Set comes with a racing HiT Clutch, 6-Star Bell, nut locker star, washers, four sets of each pillow springs, and clutch springs for fine-tuning. The Dr. Pulley HiT Clutch with 60-Degree pillow springs is for use on four-wheel CVT vehicles or scooters with a daily driving RPM. Results from using this clutch include decreased slippage and improved transmission efficiency.

NOTE: Works in conjunction with Dr. Pulley Variator 114mm Set, sold separately (Part# 169-263). Downloadable Dr. Pulley HiT Clutch Diagram.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Bell, Clutch, Clutch springs, Pillow springs, Nut locker, and Shims.

•    1x Clutch ID: 24.3<28mm / OD: 121.15mm / H: 37.18mm
•    3x Clutch Weights (shoes)
•    2x 3 Clutch Springs (SP1532407095-BL, 6.5kg)
•    1x 3 Clutch Springs (SP1632007095-BK, 10kg)
•    1x 3 Clutch Springs (SP1832565105-RD, 10kg)
•    1x 3 Clutch Springs (SCG2032007104-BK, 14.5kg)
•    3x Plastic Clutch Shims 45.5x56mm
•    1x Stainless Nut Locker Star 24x28mm
•    3x Pillow Angle 60° (plates)
•    1x 3 Pillow Springs (SP1832565105-RD, 10kg)
•    2x 3 Pillow Springs (SP2032365103-YL, 20kg)
•    1x 3 Pillow Springs (SP2031565103-PK, 25kg)
•    1x 3 Pillow Springs (SCG2231806108-RD, 27kg)
•    Iron Clutch Bell (6-Spokes) ID: 124.4mm / OD: 139.7mm / H: 43.4mm
•    Splines: 19 / ID: 13.5<15mm / OD: 20mm / H: 24.54mm
•    Made in Taiwan
•    Fit Clutch Slider: 34mm / Nuts: M12, M28 / Washer: M12 / Bearing Funnel: 43mm / Socket: 17mm, 19mm, 39mm
•    Fit Compression Spring: 1k, 1.5k, 2k rpm
•    Fit Clutch Springs: 1k, 1.5k, 2k rpm
•    Fit Belt Size: 743, 835, 842-20-30 (Fit GY6 ONLY)
•    Fit Belt Size: 816, 836-22-30 (Fit PCX ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+
•    Fit PCX 125/150cc+

Supported Models: SSP-G CVT KIT (Part# 169-530); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    1.969 pounds | 4.711" (OD) x 2.623" (ID) x 1.464" (H)
•    1.844 Pounds | 5.5" (OD) x 4.9" (ID) x 1.710" (H)