TFC Clutch Bell 10-Spokes Forged V1 Silver (GY6, PCX)

Description: TFC Clutch Bell 10-Spokes Forged V1 Silver for GY6 125/150cc 4-stroke engine-based scooters, ATVs, Honda PCX, and off-road karts.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Clutch bell.

•    1x Iron Clutch Bell (10-Spokes) Vented ID: 125mm / OD: 136mm / H: 43.6mm
•    Splines: 19 / ID: 13.5>15mm / OD: 20mm / H: 25.45mm

•    Made in Taiwan
•    Fit Clutch: 120mm / Slider: 34mm / Nuts: M12, M28 / Washer: M12 / Bearing Funnel: 43mm / Socket: 17mm, 19mm, 39mm
•    Fit Compression Spring: 1k, 1.5k, 2k rpm
•    Fit Clutch Springs: 1k, 1.5k, 2k rpm
•    Fit Belt Size: 743, 835, 842-20-30 (Fit GY6 ONLY)
•    Fit Belt Size: 816, 836-22-30 (Fit PCX ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+
•    Fit PCX 125/150cc+

Supported Models: TFC CVT KIT (Part# TFC-012); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    1.481 Pounds | 5.358" (OD) x 4.908" (ID) x 1.720" (H)