Bando CVT Belt 816-22-30 (Honda PCX)
Description: Bando Brand Premium CVT Drive Belt size 816-22-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. CVT Drive Belt size 816-22-30 commonly found on Honda PCX 125/150cc 4-stroke ATVs and Street Scooters with 12 or 13-inch rear wheel longcase engine.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces OEM Belt: 23100-KWN-901
• Nylon Reinforced Material
• Length: 816mm (Loop 16.221 in.)
• Width: 22mm (0.866 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• Made in Japan
• Fit 12" or 13" Rear Wheel Longcase Engine
• Fit PCX 125/150cc+
Supported Models: Honda PCX 125/150cc (2010 and newer)
Item Weight & Product Dimensions:
• 0.295 pounds | 16.929” (L) x 0.866” (W) x 0.354” (D)