Bando CVT Belt 758-17.5-28 (Minarelli, Yamaha)
Description: Bando Brand Premium CVT Drive Belt size 758-17.5-28 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. Belt size 758-17.5-28 commonly found on Aprilia 100 Scarabeo 2T (Minarelli Yamaha), Yamaha Aerox, Yamaha Neo's, Yamaha BW'S, BW'S100, Yamaha YW100, YW100SWC, YW100A, YW100B, and YW100D.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces Yamaha OEM Belts: 4VP(5FA)17641-00, 4VP-17641-00, 5FA-17641-00
• Nylon Reinforced Material
• Length: 758mm (Loop 14.92 in.)
• Top Width: 17.5mm (0.689 in.)
• Groove Angle: 28º
• Heat and Oil Resistant
• Made in Japan
• Fit Aprilia
• Fit Minarelli
• Fit Yamaha
Supported Models: Aprilia 100 Scarabeo 2T (Minarelli Yamaha), Yamaha Aerox, Yamaha Neo's, Yamaha BW'S, BW'S100, Yamaha YW100, YW100SWC, YW100A, YW100B, and YW100D, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.295 pounds | 14.92” (L) x 0.689” (W) x 0.354” (D)