Polini CVT Belt 750-16.8-30 Kevlar (Minarelli, Yamaha)

Description: Polini CVT Drive Belt for Yamaha Zuma 50cc 2 Stroke and Long Case Minarelli 50cc 2 Stroke Scooters. This long-lasting, heavy-duty performance Kevlar belt is designed to have less flex than a regular rubber belt. Size 750x16.8x30.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.

Specifications:

Include the following one belt.

•    Aramid (Kevlar) Fiber Reinforced
•    Length: 750mm (Loop 14.763 in.)
•    Top Width: 16.8mm (0.661 in.) 
•    Groove Angle: 30º
•    Made in Italy
•    Fit Aprilia
•    Fit Minarelli
•    Fit Yamaha

Supported Models: Aprilia 100 Scarabeo 2T (Minarelli Yamaha), Pre-2000 Aprilia SR50, Malaguti F12 and F15, Yamaha Aerox, Yamaha Jog, Yamaha Neo's, Yamaha BW'S, BW'S100, Yamaha YW100, YW100SWC, YW100A, YW100B, and YW100D, Various unlisted makes/models

-----
Item Weight & Product Dimensions:
•    0.295 pounds | 14.763” (L) x 0.661” (W) x 0.354” (D)