Bando CVT Belt 757-21.4-28 (Yamaha Vino 125)
Description: Bando Brand Premium CVT Drive Belt size 757-21.4-28 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. Belt size 757-21.4-28 commonly found on Yamaha Vino (YJ) 125cc 4-stroke scooters '04-'09.
NOTE: Open CVT cover and confirm belt size measurement is correct prior to order.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following belt.
• Replaces OEM #: 5NW-E7641-00-00
• Nylon Reinforced Material
• Length: 757mm (Loop 14.9 in.)
• Top Width: 21.4mm (0.843 in.)
• Groove Angle: 28º
• Made in Japan
• Fit Vino 125
Supported Models: NCY CVT KIT (Part# 1200-1047); Yamaha Vino 125, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.312 pounds | 14.9” (L) x 0.843” (W) x 0.354” (H)