Main Menu
Your Cart

Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)

Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)

Description: Dr. Pulley makes some of the best performing variators, clutches, and roller weights in the world. Dr. Pulley Performance Variator Assembly V201201 for Asia/European model Cygnus 125, Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125. This variator will maximize your Yamaha Vino 125, Yamaha Zuma 125, and many more models listed.

The Dr. Pulley Variator Back Plate with spacers, Drive Face, Pulley, Pulley Spacers, and Drive Boss. Pair this kit up with a set of Dr. Pulley Sliding Weights, and an NCY Performance Exhaust, and you'll sure to impress your slow, bone stock riding Yamaha Zuma buddies. 

NOTE: Recommend using a new belt with this kit. Belt and the belt drive facing plates KEEP DRY, other areas apply moly-graphite grease when assembling.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.

Specifications:

Includes the following Variator boss, Variator drive face, Variator housing, Variator slides, Variator top, and washers.

•    1x Alumin-Alloy Drive Face Fan ID: 14.2<16mm / Splines: 15 / OD: 117.5mm
•    1x Alumin-Alloy Variator Housing Gray ID: 20.9mm / OD: 117.5mm
•    1x Stainless Steel Boss Length: 48mm / ID: 16mm / OD: 20.89mm
•    1x Metal Top ID: 14.2<16mm / Splines: 15
•    3x Plastic Tan Slides
•    2x Metal Washers

•    Made in Taiwan
•    Fit 6x Roller Weights 20x12mm
•    Fit Dowel Pin Set (8x14mm)
•    Fit Belt Size: 759-22-30 (Vino)
•    Fit Belt Size: 810-22-28 (Zuma)
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Asia/European model Cygnus 125, Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125.

-----
Item Weight & Product Dimensions:
•    1.106 pounds | 4.625" (L) x 4.625" (W) x 2.968" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Dr. Pulley Variator 117.5mm Set (Vino, Zuma 125)
  • Stock: 20
  • Reward Points: 4
  • Part #: 169-410
Sold: 0
Views: 1079
$104.00
Price in reward points: 104

Included