Taida Crankshaft 57.8mm Standard Stroker (GY6)

Description: High-Quality Taida Crankshaft 57.8mm Standard Stroker assembly for GY6 125/150cc 4-stroke 152QMI / 157QMJ engines. Taida Crankshaft 57.8mm allows using a performance cylinder kit for a 125cc up to 180cc without any issue.

Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the Taida Crankshaft bearing side will be placed, in order to immediately fit the frozen crankshaft bearing, seating flush in place. Users assume full responsibility and risk doing so using this Taida Crankshaft.

Specifications:

Includes the following Crankshaft stroker, Woodruff keys, and Taida Sticker.

•    1x Crankshaft L: 285mm / Stroke L: 57.8mm
•    1x Piston Wrist Pin Slot ID: 15mm
•    1x Flywheel Shaft Thread: M12 x 16mm
•    1x Flywheel Shaft Bearing: 56mm x 22mm x 15mm
•    1x Variator Shaft Thread: M12 x 16mm
•    1x Variator Shaft Splines: 19
•    1x Variator Shaft Bearing: 56mm x 22mm x 15mm
•    1x Made in Taiwan
•    Fit Intake Studs: M6 / Nuts: M6 / Socket: 8mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 10mm
•    Fit Flywheel/Variator Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit Starter Clutch / Nut: M22 / Washer: M22 / Castle Socket: 28.7<37.6mm
•    Fit Cylinder Studs: 187.5mm 195.5mm 2V / Nuts: M8 / Washers: M8 / Socket: 12mm
•    Fit 54mm Stud Spacing (A-Block)
•    Fit 57mm Stud Spacing (B-Block)
•    Fit Dowel Pin Set (8x14mm)
•    Fit Dowel Pin Set (10x14mm)
•    Fit Woodruff Keys
•    Fit GY6 125/150cc+
•    Optional: cut plastic fan shroud for best fitment

Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•   6 pounds | 11.5" (L) x 5.25" (W) x 4.75" (H)