Main Menu
Your Cart

SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)

SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)

Description: SSP-G Crankcase 65mm Bore Right-Side with Oil Cooler Kit for upgrading to 180cc Power Kit with oil cooler or any GY6 57mm cylinder stud spacing such as Taida B-Block cases. This SSP-G Crankcase 65mm Bore Right-side with Oil Cooler Kit comes with a 65mm bored opening with a 57mm stud spacing B-Block. Its crankcase equipped with a pre-drilled direct hi-flow to oil pump cavity for easy attachment of its oil cooler assembly lines, banjo fittings. Also comes with a gasket set and timing cover.

This SSP-G Crankcase 65mm bore opening right-side means there is no machining required if pair with a left-side 65mm bore crankcase. For most 180cc cylinder's outer sleeve aka outer skirt is normally 64.9mm that can easily slip into this SSP-G Crankcase 65mm bore opening. Just bolt on any GY6 180cc Fit 57mm big bore kit, best checkout SSP-G Cylinder 63mm BBK (sold separately).

NOTE: This is NOT a complete engine, right-side crankcase ONLY. Need to reuse donor parts from B-Block (57mm).

Specifications:

Includes the following Right crankcase, Timing cover, Oil cooler with lines and Banjo fittings, Gasket set, and SSP-G Sticker.

•    1x Crankcase 65mm Bore (right, w/oil portholes)
•    1x Gasket Set (right, timing)
•    1x Oil Cooler Assembly
•    1x Timing Cover
•    Made in Taiwan
•    Fit Crankcase (left, 65mm Bore)
•    Fit Intake Studs: M6 / Nuts: M6 Socket: 8mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 10mm
    Fit Crankcase BoltsM6 / Washers: M6 Socket: 8mm
•    Fit Cylinder Studs: 196mm 204mm / Nuts: M8 / Washers: M8 / Socket: 12mm
    Fit Flywheel/Variator/Clutch Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit 57mm Stud Spacing (B-Block shortcase)
•    Fit 57mm Stud Spacing (B-Block longcase)
•    Fit 57mm Camshaft Holder
•    Fit 57mm Rockarm 2V Assembly
•    Fit Crankshaft 57.8mm +3 2V
•    Fit Dowel Pin Set (8x14mm)
•    Fit Dowel Pin Set (10x14mm)
•    Fit Cam Chain 46 (92) links
•    Fit Chain Guide (standard)
•    Fit 57mm Cylinder 61mm to 63mm
•    Fit 57mm Cylinder Head 61mm to 63mm
•    Fit GY6 125/150cc+

•    Optional: cut plastic fan shroud for best fitment

Supported Models: SSP-G Crankcase (Part# 169-482); GY6 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento

-----
Item Weight & Package Dimensions:
•    6.712 pounds | 14.5" (L) x 9.875" (W) x 8.125" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
SSP-G Crankcase 65mm Bore Rt-Side w/Oil Cooler Kit Fit 57mm (GY6)
  • Stock: 40
  • Reward Points: 11
  • Part #: 169-488
Sold: 0
Views: 21505
$289.95
Price in reward points: 290

Included