Main Menu
Your Cart

NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)

NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)

Description: NCY Drive Face 112mm CNC-Machined aluminum plus kickstart star him for 139QMB 49cc-50cc scooter engines. This set allows you to mount the original variator fan overlay and use NCY kickstart star him. The CNC-machined running surface of the disc allows for a clean, low-vibration belt operation.

NOTE: The variator fan overlay and kick starter ratchet gear are not included, sold separately. Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications: 

Includes the following Drive face, and Kickstart star him.

•    1x Aluminum CNC Machined Anodized Drive Face
•    Splines: 26 / ID: 13.5mm / OD: 112.3mm (Teeth 63) / H: 4.2<13.5mm
•    1x Stainless Steel Kickstart Him
•    Splines: 26 / ID: 13.5mm / OD: 34.32mm / H: 4<7.3mm
•    Made in Taiwan
    Fit Starter: Bendix / Lock: Bracket
•    Fit Variator Housing88mm or 89mm Weights: 16x13mm / Slides: 3 Top: 73.5mm Boss: 20mm / Shims: 20mm
    Fit Variator Fan: Overlay / Ratchet: Gear / Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 669, 729, 788-18-30
•    Fit Crankshaft 41.4mm to 44mm
•    Fit Dowel Pin Set (8x10mm)
•    Fit QMB 49/50cc+

Supported Models: NCY CVT Kit (Part# 1200-1171); 139QMB 49cc-50cc engines, Baja SC50, Boreem (BMS) 50, Filly 50, Kymco 50, Panterra 50, Qingqi 50, QLink 50, Roketa 50, SUNL 50, SYM 50, Tank 50, TaoTao 50, and virtually any other scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.281 pounds | 4.428” (OD) x 0.528” (ID) x 0.519” (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Drive Face 112mm CNC-Machined +Star Him (139QMB)
  • Stock: 39
  • Reward Points: 1
  • Part #: 1200-1161
Sold: 7
Views: 12460
$32.95
Price in reward points: 33

Included