Main Menu
Your Cart

Naraku Clutch Bell (DIO, GET, QMB)

Naraku Clutch Bell (DIO, GET, QMB)
Naraku Clutch Bell (DIO, GET, QMB)
Naraku Clutch Bell (DIO, GET, QMB)
Naraku Clutch Bell (DIO, GET, QMB)

Description: Naraku High-Performance clutch bell with a patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower operating temperature and great grip. No delay in the heavily loaded areas. Lighter weight means better acceleration. Great value for dollars for dollars in the high-end performance.

Compatible with sport clutches on the market works on Yamaha JOG Minarelli engines, Chinese Yamaha Clones such as the 1PE40QMB 1E40QMB engines, Honda Ruckus, 139QMB 50cc 4 stroke engines, Vertical Honda DIO style 2 stroke engines found in SYM and Kymco Scooters, as well as Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303 and Peirspeed Scooters.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.


•    Cross-Drilled Heat Dispersion and Debris Extraction
•    Inner Textured for Better Initial Bite
•    Ultra-Efficient Cooling Properties
•    Lighter Than Stock Clutch Bell


Include the following Clutch bell.

•    Iron Clutch Bell I.D: 108mm / O.D: 119mm / H: 38mm
•    Splines: 22 / I.D: 11<12mm / O.D: 20mm / H: 24.77mm
•    Made in Taiwan
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x14mm)
•    Fit Belt Size: 654 (Fit DIO ONLY)
•    Fit Belt Size: 660, 785 (Fit GET ONLY)
•    Fit Belt Size: 
669, 729, 788 (Fit QMB ONLY)
•    Fit DIO 49/90cc+

•    Fit GET 49/50cc
•    Fit QMB 49/50cc+

Supported Models: Naraku CVT Kit (Part# KIT.A.139QMB); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.

Item Weight & Product Dimensions:
•   1.2 Pounds | 4.685" (OD) x 4.252" (ID) x 1.496" (H)

Write a review

Note: HTML is not translated!
Bad Good
Naraku Clutch Bell (DIO, GET, QMB)
  • Stock: 17
  • Brand: Naraku
  • Reward Points: 2
  • Part #: NK900.56
Products Sold: 2
Product Views: 9985
Price in reward points: 57