Dr. Pulley Variator Slide Set (CFMoto, CN250)
Description: Dr. Pulley Variator Slide Set for Honda Helix CN250 172mm 250cc 4-stroke engines. The slide pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers. The Dr. Pulley Variator Slides are made of the same abrasion-resistant nylon as the Dr. Pulley Roller Weights, which promises a long life.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
• 3x Plastic Slides
• Made in Taiwan
• Fit Roller Weights 23x18mm
• Fit CFMoto
• Fit CN250+
Supported Models: CFmoto V3/V5, CN250 172mm 250cc 4-stroke water-cooled engines, Boreem (BMS), Kazuma, Lifan, Roketa MC13-250, Roketa MC54-250B, SUNL SL250-22, Tank Touring 250T-H, Tank Touring DE, and various unlisted makes/models.
Item Weight & Package Dimensions:
• 0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)